I am integrating a Fireblade Engine with a Micra Radiator and have a few questions regarding coupling up:

The Radiator has a built in thermostat? or Switch?

The Engine has a built in thermostat.

Should I connect both the Engine 'stat (to temperature clock. Then the Radiator Switch (?) in series to the fan?

Basically what I am asking is: is the Radiator widjet a Switch or a Thermostat?

Any help would be appreciated!

Fan switch as far as I can tell. Its wired to the fan attached to the back of the rad anyway. (Well mine is)

The radiator should have a thermostatic switch. Is the one on the engine used as a water temp gauge sender on the bike? it is on my old 600 and is wired seperate from the rad switch.

yours, Pete.

so much!!!

Will use the thermostat from the thermostat housing block then...

Thanks again!