Hi,
need a couple of bolts with hole drilled through to retain clutch and throttle cables, solderless nipples not strong enough.
Anyone know if these are available online?
(yeah I know I could make my own, but after the third drill bit I've 'ad enough!)

thanks
jim

There maybe someone on here with a Lathe that could make them for you.

Sorry i dont have one .

N

what about soldered nipples then?

clean the cable end, slapy it out, some plumber solder and job done.

VWP sell he cable and nipples - hundreds of thousands of BSAs used this without problem.

but if you insist on drilling bolts - not easy as you have found out, then what about using the cable adjusters? bit more pricey unfortunately.

You could just drill through a couple of bolts. I have. File a flat on the bolt by the head and mark with a centre punch. Hold the bolt in a vice and drill.