FASTdan
|
| posted on 5/11/08 at 08:47 PM |
|
|
Mitsubishi Alternator on pinto
Hi all,
The PO of our mk appears to have fitted (including fabricated bracket) a mitsubishi alternator to the pinto. Is this a well known option?
I understand that this will have been done due to the ford one interfering with the chassis.
The alternator has 1 large white wire on its own. Then a thin white with red stripe, and thin black with white stripe together on a plug.
Can anyone advise what each of these wires are? Looking at the sierra wiring diagrams it looks like the original would only have had 2 connections?
Bit stuck with this, a quick mess around with a meter (with engine running) revealed nothing.
cheers
Dan
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
philw
|
| posted on 5/11/08 at 08:52 PM |
|
|
I could be wrong but, the two thin wires, one will be for the dash light and the other will probably be a switched live from the ignition to excite
the alternator.
Thats how it works on mine (daihatsu alternator)
[Edited on 5/11/08 by philw]
[Edited on 5/11/08 by philw]
Must try harder
|
|
|
FASTdan
|
| posted on 6/11/08 at 12:41 PM |
|
|
quote:
Originally posted by philw
I could be wrong but, the two thin wires, one will be for the dash light and the other will probably be a switched live from the ignition to excite
the alternator.
Thats how it works on mine (daihatsu alternator)
That sounds reasonable - in the file we got with the car there is info on daihatsu alternators so im guessing he was going along the same lines.
Now I need to work out which one of the two needs a live?
[Edited on 5/11/08 by philw]
[Edited on 5/11/08 by philw]
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
