myeates
|
| posted on 4/1/09 at 05:19 PM |
|
|
megasquirt question
Hi all
just getting together a list of what i need to put megasquirt on my car.
I will be using it for spark first then injection once spark is working and running for a bit,
is it possible to use the distributor (electronic bosch) as the sensor instead of a VR sensor on the crank pulley, still looking at using the ford
Edis and coil pack but wondered if i really need the toothed signal
thanks in advance
Mark
[Edited on 4/1/09 by myeates]
|
|
|
|
|
blakep82
|
| posted on 4/1/09 at 05:26 PM |
|
|
yeah you will need a tooth trigger wheel signal, its just how the edis works
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
BenB
|
| posted on 4/1/09 at 05:27 PM |
|
|
http://www.aeu86.org/viewtopic/tutorial--megasquirting-an-european-(map)-ae86-(4age)/p/96685
appears to show exactly that....
Usually trigger wheels have a missing tooth so an ECU can work out exactly what's going on. Obviously this wouldn't be happening with a
dizzy based system....
|
|
|
BenB
|
| posted on 4/1/09 at 05:28 PM |
|
|
http://www.302w.com/Windsor_MegaSquirt_Part6.aspx
it appears it's very do-able though!!!
|
|
|
blakep82
|
| posted on 4/1/09 at 05:45 PM |
|
|
hmmm, i stand corrected, said the man in the orthopedic shoes 
not really sure how that works though
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
myeates
|
| posted on 4/1/09 at 06:30 PM |
|
|
thanks for that will need to look into it a bit more before i do it. not sure how it works yet myself
|
|
|
