RK
|
| posted on 26/1/09 at 02:08 PM |
|
|
switches 2 position, 3 pole
My rocker switches for hazards, fan etc have 3 poles on the back. Why 3 and not 2? Should I run the power to them in series?
|
|
|
|
|
02GF74
|
| posted on 26/1/09 at 02:14 PM |
|
|
is this not the same question?
|
|
|
RK
|
| posted on 26/1/09 at 05:50 PM |
|
|
Hey easy. I turn 50 in a couple of weeks. Thank you for everything . Sorry
|
|
|
flibble
|
| posted on 26/1/09 at 08:54 PM |
|
|
3 pole switches are generally (be aware i suck at electrics!)
12v power to the common (middle?) pole.
This is then fed to pole 2 when the switch is in the off position (not every switch need to be turned on for it to be powering something) OR fed to
pole 3 when it's switched on, like you'd expect from a switch.
something l;ike that anyway 
|
|
|
