Smiths telemetrix tacho wiring

Not logged in [Login - Register]

LocostBuilders » Forum » Electrics » Smiths telemetrix tacho wiring

Power Tools at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

johhny5

Contributor

Posts 140
Registered 23/5/07
Location kettering Northants
Member Is Offline

Photo Archive Go!

Building: Lots of mods

posted on 19/6/09 at 03:50 AM

Smiths telemetrix tacho wiring

Hi,
could someone confirm where i need to connect the input wire for my rev counter.
The info says low tension side of the ingnition circuit.
Is that the input to the coil from the dizzy?
I have the electronic module and breakerless points set up from the original 1.6 sierra donor
cheers
John

MikeRJ

Contributor

Posts 10261
Registered 27/12/02
Location UK
Member Is Offline

Photo Archive Go!

Building:

posted on 19/6/09 at 07:07 AM

Yes, you need to connect the tacho to the switched (distributor) side of the coil.

LocostBuilders » Forum » Electrics » Smiths telemetrix tacho wiring

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.