02GF74
|
| posted on 30/6/09 at 12:56 PM |
|
|
bracket for small denso alterntor - show me!
the denso alternato has 2 lugs as oposted to 3 that you normally get e.g. Lucas
Those who have fitted on, in particular to crossflow or pinto engine, please can you post photo of your bracket and what thickness steel it is made
from.
ta.
|
|
|
|
|
nick205
|
| posted on 30/6/09 at 01:12 PM |
|
|
Have a look on my website under August 2004 section for some pics of my Denso/Pinto mounting bracket.
Fashioned (fairly crudely) from a bit of 75x75x5 steel angle I found lying about. Doesn't look brilliant, but does the job perfectly and TBH
you can't see it anyway.
|
|
|
flak monkey
|
| posted on 30/6/09 at 01:14 PM |
|
|
I fitted one to my duratec, have a look in the thread in the engine section 
Much easier to make 2 seperate brackets.
Made mine from 5mm thick, 25mm wide steel strip. Nice and solid, but not too overkill.
David
Sera
http://www.motosera.com
|
|
|
v8kid
|
| posted on 30/6/09 at 03:28 PM |
|
|
Pic1
.jpg)
|
|
|
v8kid
|
| posted on 30/6/09 at 03:29 PM |
|
|
pic2
.jpg)
|
|
|
v8kid
|
| posted on 30/6/09 at 03:29 PM |
|
|
pic 3
.jpg)
|
|
|
v8kid
|
| posted on 30/6/09 at 03:30 PM |
|
|
pic 4
.jpg)
|
|
|
big_wasa
|
| posted on 30/6/09 at 09:08 PM |
|
|
Zetec but thats not far of a x-flow
|
|
|
