Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: audi aftermarket head unit install
RK

posted on 2/3/12 at 12:25 AM Reply With Quote
audi aftermarket head unit install

Thought I hooked everything up correctly, but no joy except a flashing light (constantly on). Unit is an EBay thing, that does everything except wash dishes - reportedly. Any advice? And I am aware of some VW/Audi ECU code reader issues.
Car: 2006 Audi A4 Avant
Old Radio unit; Symphony II

Done the searches, but still fairly confused. Spent about 3 hours on it this afternoon all for nought. I think i like kit cars better!!

View User's Profile View All Posts By User U2U Member
Ben_Copeland

posted on 2/3/12 at 07:22 AM Reply With Quote
Could it be something to do the can-bus system ? Or needing to activate an option with vag-com?

There's loads of videos on YouTube that guide you through installation





Ben

Locost Map on Google Maps


Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

View User's Profile View All Posts By User U2U Member
big_l

posted on 2/3/12 at 08:04 AM Reply With Quote
i had a audi s3 with an aftermarket stereo and vag com would only work with std stereo plugged back in !!





Check out my blog mnrvortxhayabusa@blogspot.com

View User's Profile E-Mail User View All Posts By User U2U Member
RK

posted on 2/3/12 at 01:04 PM Reply With Quote
Well, the car worked with the new one; just the new one didn't do anything. None of the youtube videos are understandable. However, I just noticed that a wire was not properly seated in one of the connectors, so this may explain the difficulty the thing had running. I will try again tonight.

[Edited on 2/3/12 by RK]

View User's Profile View All Posts By User U2U Member
bi22le

posted on 2/3/12 at 01:44 PM Reply With Quote
I take it the light you mention is on the radio?

Does the situation change with the ingnition fully turned on? If it works when engine \ ignition is on then your red and yellow wires are the wrng way round.

The Can bus should not change anything along as that year of car is still using the ISO ( 8-pin rectangular) plug. Also make sure the arial is also connected, sometimes the radio takes its earth through there.

Bottom line seems to be that the unit haas power but wont turn on. You have got it from ebay so you will always run the risk of it being faulty.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
RK

posted on 2/3/12 at 05:43 PM Reply With Quote
Yes, the light was on the unit, and yes, the seller offered to reimburse me. Now my front speakers aren't working with the old Symphony II unit. I think I should take it into someone who does this sort of thing more than once ever 25 years or so.

Warning: one guy would not touch it because he hasn't seen one that works. Lesson learnt.

[Edited on 2/3/12 by RK]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.