wylliezx9r
|
| posted on 22/5/13 at 08:25 AM |
|
|
KOSO DB-02R RPM wiring
Hi Guys & Gals,
Im struggling with the instructions for the RPM wiring ( see below ). I'm using a Honda F20C engine which uses coil on plug ignition. It looks
to me that I should be using the RPM wire set A, the instructions seem to show the wire wrapped around the coil ? There is also a lug on the wire,
what am i supposed to do with that ? Or am i completely wrong and I should be using another method ?
[img]
 
[/img]
[img]
[/img]
[img]
[/img]
[img]
[/img]
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
|
|
twybrow
|
| posted on 22/5/13 at 04:03 PM |
|
|
I would try type B - use the signal (+ve) wire to the coil... That worked on my bike engine.
|
|
|
MsD
|
| posted on 25/5/13 at 02:25 PM |
|
|
Did you find a method that works?
I'm in the same boat today and struggling to get a reading. Tried both the coil and the HT lead and not getting a response!
Mark.
|
|
|
