Dooey99
|
| posted on 13/10/13 at 04:59 PM |
|
|
fuel sender
is there anyway i can convert my 40 ohm fuel sender to 100 ohm? it is 40 when full and about 12 when empty, i am using an acewell dash which runs with
100, 250 or 500 ohm fuel sender, if not where can i get a cheap sender that will work?
thanks
Less weight more speed, more power more speed
If in doubt, give it a clout
|
|
|
|
|
big-vee-twin
|
| posted on 13/10/13 at 06:27 PM |
|
|
Have a look at the fuel guage wizzard
linky
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
whitestu
|
| posted on 13/10/13 at 07:12 PM |
|
|
I used the sender from my Sierra donor with my Ace well.
Stu
|
|
|
Scuzzle
|
| posted on 13/10/13 at 10:50 PM |
|
|
Can anyone who has the fuel gauge wizard fitted tell me how easy it is to calibrate and what's involved in getting a gauge and sender matched
up.
Is it easy or a bit of a chore as I have gauge and sender issues as well and would buy one of these if I knew it was an easy fix.
|
|
|
