zxrlocost
|
| posted on 10/5/06 at 09:56 AM |
|
|
r1 wiring hazards up for SVA done but only works when ignition is on
hi as above hazards work perfect
but for the SVA arent they supposed to work with out the key in the ignition like my park lights do
if so when I feed a 12v+ to the indicator loom it makes the hazards work perfect BUT it also make the igntion come on and everything so you can start
the car without the key
anyone got any suggestions??
ta chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
mackei23b
|
| posted on 10/5/06 at 10:24 AM |
|
|
Hi there
Here is the quick fix...........
Use the 12v feed as you have done from the battery (with suitable in line fuse) and disconnect the original feed from the ignition part of the
loom.
This should mean that the hazards, and indicators will work with the keys out, but that is all.
Hope this works, but I've not had a chance to look at the wirng diagram.
Cheers
Ian
|
|
|
mackei23b
|
| posted on 10/5/06 at 10:26 AM |
|
|
Sorry just as I hit the post I though I should ask you, when you put the extra pwer feed in, did the indicators still flash, if so this should
hopefully work, but not gauranteed, good luck
Regards
Ian
|
|
|
zxrlocost
|
| posted on 10/5/06 at 10:30 AM |
|
|
hi Ian the 12v is coming from the permanent igntion live
but its not as if IM joining the other igntioin wire to it?ie the thick brown which is only live when turned on!
so take 12v from battery and connect it where ??
ta chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
mackei23b
|
| posted on 10/5/06 at 10:53 AM |
|
|
Hi there
If you can get me a wiring diagram, I should be able to sort it out for you.
Cheers
Ian
|
|
|
zxrlocost
|
| posted on 10/5/06 at 11:20 AM |
|
|
here you go mate
http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=1998%201999%20r1%20wiring%20diagram.JPG
Im taking it from the RED permanent 12v+ ign
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
Peteff
|
| posted on 10/5/06 at 11:56 AM |
|
|
Are you using the R1 switches and flasher relay or a Sierra one?
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
mackei23b
|
| posted on 10/5/06 at 11:59 AM |
|
|
Hi there
Sent u2u
Cheers
Ian
|
|
|
zxrlocost
|
| posted on 10/5/06 at 12:13 PM |
|
|
Im using the whole r1 loom with savage switches
ta
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
Hellfire
|
| posted on 10/5/06 at 03:07 PM |
|
|
Sounds to me like you aren't navigating power through the switch correctly. Have a look at our diagram on the website in 'help'
Steve
|
|
|
zxrlocost
|
| posted on 10/5/06 at 04:54 PM |
|
|
ok cheers
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
.jpg){kind=avatar}
