Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: video cam suggestions
Moorron

posted on 13/6/06 at 08:29 AM Reply With Quote
video cam suggestions

Im looking at getting some incar footage like many here do, i have a sony digi 8 cam corder with video inputs. im looking for a good plug in cam and mic OR are these digital cam corders (pvd?) any good? the ones that record onto sd memory cars, these seem much smaller than my cam so i could mount the whole unit without it being unstable.

is maplins a good place to get these bits from? i have one locally and would rather goto a shop than order via the internet.

Any comments on this subject would be nice.

Cheers Andy.





Sorry about my spelling, im an engineer and only work in numbers.

View User's Profile View All Posts By User U2U Member
tks

posted on 13/6/06 at 09:35 AM Reply With Quote
mhh

look for something like a D. Snap?

dunno if its any good but on e-bay there quite a few

also they can have huge memory etc. etc.

tell me about the pro´s and contro..

etc.

Walter





The above comments are always meant to be from the above persons perspective.

View User's Profile View All Posts By User U2U Member
richijenkin

posted on 13/6/06 at 11:02 AM Reply With Quote
If it has AV-IN then you could use one of these: http://www.dogcamsport.co.uk/dogcampro480.htm

me and ox have one and can say they do the job very well. I have some low-res vids on my site under MK Indy.






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Moorron

posted on 13/6/06 at 02:15 PM Reply With Quote
CHEERS MUCKA. just ordered this kit

http://www.sports-camera.com/helmet_cameras.htm#Bullet_Camera_Package_includes:

kit 3, included a mic too. should b with me this week so will report back how well this one is compaired to yours (looks the same tho).

i do like those suction mounts off that site tho, great idea. (£20 is a rippoff they look like cable clamps just bolted to a suction cup).





Sorry about my spelling, im an engineer and only work in numbers.

View User's Profile View All Posts By User U2U Member
RichieC

posted on 14/6/06 at 09:17 PM Reply With Quote
Just out of interest, what if any options are available for non DV in cameras? Im assuming none but is there a way to add one?

My camera is great but lacks DV in and likewise for mic so I suspect any footage will be awful with windrush.

Sorry for hijack but either of those options were my preferred until I realised I didnt have DV in

Rgds

Rich

View User's Profile View All Posts By User U2U Member
richijenkin

posted on 15/6/06 at 05:05 PM Reply With Quote
its av-in you need not dv.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Krismc

posted on 15/6/06 at 06:04 PM Reply With Quote
iVE JUST BOUGHT ONE FROM WWW.FASTFILMS.CO.UK

i got a top range bullet camera, and roll bar mount - plus a neuros from ebay to record the lot and a sony memory car all in all came to £350 instead of around £500

brilliant quality and solid state!





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
RichieC

posted on 15/6/06 at 06:28 PM Reply With Quote
quote:
Originally posted by richijenkin
its av-in you need not dv.

Yep sorry, meant AV in






View User's Profile View All Posts By User U2U Member
Moorron

posted on 15/6/06 at 09:31 PM Reply With Quote
mine does have dv in but like said b4 its av in u need, got it today and tie wrapped it to my rollbar (the one that came with it is a stick on affair and i dont want that). took it for a test and its great, pos of the mic is more fiddly as it is too sensative so ive left it on the prop tunnel.

i wish i got it last night as i took some stress out from work in the car a dinner and i think i smoked £50 worth of tires in 20 minutes. that would have been good to see.

mine way £150 all in, but i needed to raid my nitro model car for some rechargable batteries.





Sorry about my spelling, im an engineer and only work in numbers.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.