Aboardman
|
| posted on 11/8/06 at 10:52 AM |
|
|
acewell
Looks like i am looking at an acewell system for my mini project (not a bec).
I know people bought these, how are they for the car engines, are the bright enough and big enough displays.
and can you calibrate the fuel gauge.
|
|
|
|
|
mackei23b
|
| posted on 11/8/06 at 12:22 PM |
|
|
Manual available from:
http://www.acewell-meter.com/images/ACE-27-28XX-EN%20V3.pdf
Cheers
Ian
|
|
|
hector
|
| posted on 11/8/06 at 03:10 PM |
|
|
I have fitted an acewell to mine and it is ok.
Fuel gauge cannot be calibrated but i just adjusted my sender by stripping down and using a ohm-meter found the point on windings that was 100 ohms,
then cut the rest out and unwound what was left and Rewound it evenly over the operating area and it is now perfect fuel reading!
cheers Colin
|
|
|
.jpg){kind=avatar}
