supercat
|
| posted on 16/4/07 at 02:07 PM |
|
|
What gauge wire for alternator?
As the title says really, for the main feed from alternator to battery.....
Cheers,
James
|
|
|
|
|
ned
|
| posted on 16/4/07 at 02:40 PM |
|
|
16mm wire.
got mine from VWP
near bottom of this page:
http://www.vehicle-wiring-products.co.uk/VWPweb2000/cables/cables.html
[Edited on 16/4/07 by ned]
beware, I've got yellow skin
|
|
|
supercat
|
| posted on 16/4/07 at 02:42 PM |
|
|
Ta.
James
|
|
|
fesycresy
|
| posted on 16/4/07 at 02:57 PM |
|
|
Any good motor factors should have a coil on the shelf.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
theconrodkid
|
| posted on 16/4/07 at 03:26 PM |
|
|
get some from an old loom
who cares who wins
pass the pork pies
|
|
|
02GF74
|
| posted on 16/4/07 at 03:33 PM |
|
|
I used two parallel runs of 6 mm2 calbe -this is the largest diameter that will fit the lucas type plug with the side tags. (that is good for 100A -
the alternator is rated at 65 A so more than ample).
16 mmm2 !!! 
|
|
|
darrens
|
| posted on 16/4/07 at 04:35 PM |
|
|
quote:
Originally posted by ned
16mm wire.
got mine from VWP
near bottom of this page:
http://www.vehicle-wiring-products.co.uk/VWPweb2000/cables/cables.html
[Edited on 16/4/07 by ned]
christ!! it ott
|
|
|
.jpg){kind=avatar}
