The Baron
|
| posted on 2/6/07 at 03:56 PM |
|
|
Rear Fog Light !!!
I have been adding the finishing touches to the car today. Looking at SVA type things, which of course involved driving it up and done my
cul-de-sac.
Question....
Does any know where I can get a proper angled plinth to mount my fog light on to keep it vertical (locost 7 rear) I tried making one out of MDF but it
looked S**T, or does any one have any ideas?
Cheers,
The Baron
|
|
|
|
|
Peteff
|
| posted on 2/6/07 at 04:18 PM |
|
|
Put one on a bracket till after the SVA then mount it flush on the back panel, MOT stations aren't bothered as long as it lights up 
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Humbug
|
| posted on 2/6/07 at 04:35 PM |
|
|
Yes - I made a bracket which I self-tapped under the rear rail for SVA. Not very pretty but got through
http://www.locostbuilders.co.uk/viewthread.php?tid=67430
[img]http://www.locostbuilders.co.uk/viewthread.php?action=attachment&tid=67430&pid=564167[/img]
|
|
|
scoey m
|
| posted on 2/6/07 at 06:33 PM |
|
|
I sanded plinth down on mine to fit vertical on panel easy enough to do
if slighly out put some packing behind top of light i used 2mm plastic no questions at sva
hope this helps
|
|
|
Macbeast
|
| posted on 2/6/07 at 07:08 PM |
|
|
I think SVC may do angled plinths
|
|
|
