nathanharris1987
|
| posted on 5/7/07 at 08:59 PM |
|
|
Buying or buying/ making megajolt.
Alrite chaps,
For people that have gone down the megajolt route, bit of direction needed please.
Where can I get the megajolt bits and board from for a TPS megajolt set up? I see the unit selling as complete for circa £100 but surely theres
suppliers that sell as a kit to be soldered? £100 seems a bit pricey to me.
Ta very much!
Nath
|
|
|
|
|
big_wasa
|
| posted on 5/7/07 at 09:10 PM |
|
|
£100 is a bargain and worth every penny.
Omex , Alpa , Dunnell ect ect
You wont see change out of £450
You can build it cheaper if you make 10 as some bits have a min order quantity. Get one ready made and tested. There are a couple of guys around here
that could sort you out 
Imho 
|
|
|
dave-69isit
|
 posted on 5/7/07 at 09:29 PM |
|
|
megajolt
try paulf or ray ward
|
|
|
lotustwincam
|
| posted on 5/7/07 at 09:47 PM |
|
|
With exchanges rates working io our favour, you can buy direct from USA
Autosport Labs
Allow about another £20 - £25 if you are unfortunate to be hit for import duty.
|
|
|
Jed
|
| posted on 6/7/07 at 05:16 AM |
|
|
You should be able to do it for a lot less especially if you can aquire the coil pack, crank sensor, EDIS4 and TPS cheaply. I used a Zetec 1.8 in my
last 2 Westfields and only needed an EDIS4 as the rest was with the engine.
The PCB and components was about £30 plus delivery from Bill Shurvinton from the WSCC forum but that was a few years ago. Not sure if he still does
them.
A case was under a tenner from Maplin.
|
|
|
matt_claydon
|
| posted on 6/7/07 at 09:17 AM |
|
|
Pretty sure Bill Shurvinton still does them, he's certainly still doing Megasquirts etc. Stick his name in google and you'll find his
email.
|
|
|
nathanharris1987
|
| posted on 6/7/07 at 02:04 PM |
|
|
thanx
ta very much for the help, im looking into it.
Nath
|
|
|
Ratters
|
| posted on 8/7/07 at 06:06 PM |
|
|
This any good??
http://www.turbosport.co.uk/showthread.php?t=120120
|
|
|
