2b_pablo
|
| posted on 5/9/07 at 09:39 AM |
|
|
Indicator warning lights
Hi all, in my kitcar there is a single bulb for indicators. This is driven by 2 wires from the sierra loom.
Ive just bought a Bright 6 module though and it has seperate bulbs for each inidcator so Im wondering how to wire it up.
My gut says take each wire from the current single bulb and attach to each new indicator bulb and this should work but Im not so sure.
I would just common them up but the Bright 6 uses a common earth for all the bulbs so its not possible.
Any help appreciated
|
|
|
|
|
omega 24 v6
|
| posted on 5/9/07 at 09:48 AM |
|
|
If your cars got indicators on the scuttle I'd tap int each of them for the bright six and leave the existing one in place or safely isolate the
wiring behind it.
If it looks wrong it probably is wrong.
|
|
|
Dusty
|
| posted on 5/9/07 at 10:30 AM |
|
|
Single indicator bulb will have one wire from each indicator circuit and uses the inactive wire to earth the active side through the bulb. Just remove
wires from the indicator bulb and connect one to each of the of the bright six indicator lights as you first thought.
|
|
|
2b_pablo
|
| posted on 5/9/07 at 10:32 AM |
|
|
excellent thats what I thought just wanted to be sure.
thanks 
|
|
|
2b_pablo
|
| posted on 5/9/07 at 09:08 PM |
|
|
worked a treat thanks
|
|
|
