Fiesta Electronic Distributor For Crossflow info

Not logged in [Login - Register]

LocostBuilders » Forum » Electrics » Fiesta Electronic Distributor For Crossflow info

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

RichieW

Contributor

Posts 456
Registered 13/12/02
Location Stockton on Tees
Member Is Offline

Photo Archive Go!

Building: McSorley based xflow

posted on 13/11/07 at 10:33 PM

Fiesta Electronic Distributor For Crossflow info

I'm not sure if this is already known but I was looking at my shiney new mark two fiesta Electronic distributor that I bought a few months back on ebay for my crossflow. It didnt come with the wiring plug which fits on the ignition module on the side.
Anyway, I typed in the serial number on the side and came up with this web page.

http://www.mobiletron.com.tw/detail_main.asp?ID=867

Which shows the module and lists all the applications it was used in. The wiring was used on a lot of different cars so there should be a healthy supply of plugs knocking about in your local scrapyard. Very handy if like me you bought the dizzy new and didnt get the rest of the wiring with it.

No more searching for mark two Fiestas anymore (I hope)

LocostBuilders » Forum » Electrics » Fiesta Electronic Distributor For Crossflow info

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.