U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Electrics » ESC Vacuum? MIG Welders & ARC Welders at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: ESC Vacuum?
Fel-Tip-Ben
Junior Builder






Posts 6
Registered 2/10/08
Member Is Offline


Building: 2.0 zetec Fiesta Xr2 on weber 40's and mk3 es
posted on 8/10/08 at 07:10 PM Reply With Quote
ESC Vacuum?

I have a 2.0 zetec on weber carbs and im gonna run it on the esc setup for now, but i wanna make sure something before i fit it.... where does the vacuum pipe go? to the manifold??? if so im gonna have to drill and tap the manifold. Any help appreciated, Ben
View User's Profile View All Posts By User U2U Member
big_wasa
Contributor






Posts 10690
Registered 9/12/04
Location spalding
Member Is Offline

Photo Archive Go!
Building: Nothing
posted on 8/10/08 at 07:46 PM Reply With Quote
Yes you need to drill and tap or weld a stub on. Dont forget the one way valve or the pipe and esc will fill with fuel.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Electrics » ESC Vacuum? go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.