eddie99
|
| posted on 11/8/13 at 04:14 PM |
|
|
Elite Delta Project
Hi,
Considering selling the delta project, purely to free up some space as i don't have a plan to race it in the next few months. Can only
concentrate on one project at a time.
A brief spec of the car:
AB Performance Kawasaki 2008 zx10 engine - done 3 laps qualifying behind safety car, and a 20minute bikesports at snetterton last year.
AB Billet Wet Sump and baffle plate - £500
Accusump
Mocal Oil cooler
Twin rad system.
Powercommander, mapped with 160bhp at wheels at Daytuner.
Titan Steering Rack
Inboard front and rear Pushrod setup.
Quick release Boss
AP Calipers And master cylinders
3 sets of compomotive wheels and brand new tyres. £2.5k worth
Quaife Chain drive differential, with a few different sprockets to trial.
Paddle shift with flat shifter to fit (not fitted at the moment)
Nitron remote reservoir two way adjustable dampers
Adjustable brake bias
Brand new digidash dash and logger ready to fit
Plumbed in Extinguisher
6 point FIA indate harness
Fia rain light
electric water pump
3 Piece Fibreglass bodywork
Aluminium honeycombe splitter
Covered trailer available as well to go with the car.
Various boxes full of spare springs etc...
Downside is it was built around me, (a very small person) larger people will struggle to fit without some modifications. Fit the dash/logger and its
ready to go, Could do with a bit of TLC on the bodywork front.
Thousands of hours went into this project and its a shame to be putting it up for sale, Not sure whether to split or sell complete, if anyones
interested give me a call or a u2u.
[Edited on 11/8/13 by eddie99]
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
daniel mason
|
| posted on 11/8/13 at 04:36 PM |
|
|
do you have weight, and dimensions for the car ed? u2u on its way!
|
|
|
MK9R
|
| posted on 11/8/13 at 09:36 PM |
|
|
Could be interested in engine if you decide to split
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
jeffw
|
| posted on 11/8/13 at 09:41 PM |
|
|
Looks like a Global Light with a different nose, any more photos?
|
|
|
eddie99
|
| posted on 11/8/13 at 09:43 PM |
|
|
quote:
Originally posted by jeffw
Looks like a Global Light with a different nose, any more photos?
Probably because the body was once a global gt body but extended 400mm and with an added nose 
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
ste
|
| posted on 12/8/13 at 02:31 AM |
|
|
Sorry to go off topic but why does it have canards? I was under the impression they are designed to divert airflow above wheels/ suspension etc but
they don't appear to be doing anything on that car.
Not trying to be arsey, just curious, thanks
|
|
|
eddie99
|
| posted on 12/8/13 at 08:31 AM |
|
|
quote:
Originally posted by ste
Sorry to go off topic but why does it have canards? I was under the impression they are designed to divert airflow above wheels/ suspension etc but
they don't appear to be doing anything on that car.
Not trying to be arsey, just curious, thanks
Hi
Winglets on sevens can be for that purpose but canards (otherwise known as dive planes) tend to be to increase the frontal downforce. With the rear
wing and floor/diffuser, its very easy on the delta to set up the car with lots of rear end downforce but very little at the front. We made and fitted
the Canards to help balance this. Quite common on race cars.
Cheers
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Chan_chai
|
| posted on 13/8/13 at 08:54 PM |
|
|
Hi,
Is still for sale?
How much is the asking price?
What is required to get the car ready for trackday use?
|
|
|
eddie99
|
| posted on 13/8/13 at 08:59 PM |
|
|
quote:
Originally posted by Chan_chai
Hi,
Is still for sale?
How much is the asking price?
What is required to get the car ready for trackday use?
Hi
Probably best to give me a call on 07590 804865.
Kind Regards
Ed
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Chan_chai
|
| posted on 13/8/13 at 09:07 PM |
|
|
Ok but perhaps a rough idea on price as we could be 1 million miles apart in value. And wasting each others time.
|
|
|
Chan_chai
|
| posted on 13/8/13 at 09:10 PM |
|
|
Thank you for the offer Daniel.
I seen your car before for sale but it requires to much work for me.
Why do you wish to sell as you have only recently purchased?
|
|
|
Chan_chai
|
| posted on 13/8/13 at 09:12 PM |
|
|
Sorry that should have been a reply to u2u message, computers are not good to me
|
|
|
ste
|
| posted on 13/8/13 at 09:21 PM |
|
|
You really do put people off by not having a price on an advert.
I bet 90% of people looking at it dismiss it as there's no price.
Even an "offers in region of" is more useful.
|
|
|
daniel mason
|
| posted on 13/8/13 at 09:24 PM |
|
|
its well priced! and if eddies a bit less tight he may have a buyer
very very nice looking car! similar to mine but slightly higher spec
|
|
|
Chan_chai
|
| posted on 13/8/13 at 09:28 PM |
|
|
So you offer for sale your car for 8500 by private so you can buy this car I ask about.
|
|
|
eddie99
|
| posted on 13/8/13 at 09:32 PM |
|
|
To be honest, if i split it, i think theres near to £10k worth in parts alone/parts i could use on building other cars etc.. So offers of £10k+ or
swaps, try me....
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
daniel mason
|
| posted on 13/8/13 at 09:33 PM |
|
|
not at all. ive been in contact with eddie from the start about the car and my situation and he knows the situation. i am interested in the car but
waiting on someone else viewing it first. i messaged you PRIVATELY in case you were put off by the asking price OF eddies car,saying i would consider
selling.thats all.im happy to keep my car as its great but eddies caught my eye.
oh and welcome to the forum
|
|
|
scootz
|
| posted on 14/8/13 at 11:53 AM |
|
|
LOL.. you thinking of moving the ADR on already Dan? You're worse than me!
PS - have a free bump Eddie.
It's Evolution Baby!
|
|
|
daniel mason
|
| posted on 14/8/13 at 05:21 PM |
|
|
sometimes things just catch my eye and when they do,my gut instinct says buy!
ive found this is the best way for me to do my business,and all my cars up to now have been very very good.and ive not lost.,and usually made money on
all of them bar 1 which was a new build so understandable! this is slightly different though as i really like the ADR chassis design and have got
loads of nice bits for it including new motor and 11x center locking split rims with tyres!
another free bump for eddie and good luck this weekend!
|
|
|
eddie99
|
| posted on 6/9/13 at 10:15 PM |
|
|
Put it up on Racecarsdirect: http://www.racecarsdirect.com/listing/50198/2012_elite_delta_zx10_powered.html
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
eddie99
|
| posted on 25/9/13 at 06:32 PM |
|
|
Bump!
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
eddie99
|
| posted on 26/10/13 at 03:38 PM |
|
|
Pending Payment and Collection on Tuesday, The Delta will be going to its new home.
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
eddie99
|
| posted on 29/10/13 at 10:29 PM |
|
|
A sad but exciting day! Been picked up this evening, 1 happy buyer!
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
bi22le
|
| posted on 29/10/13 at 11:11 PM |
|
|
I bet. Is that the project canned or are you now working on the next version?
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
eddie99
|
| posted on 29/10/13 at 11:16 PM |
|
|
quote:
Originally posted by bi22le
I bet. Is that the project canned or are you now working on the next version?
Concentrating all our efforts on the Elite Pulse, you never know though, we might venture back into similar style of car but it won't be for a
while.
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
