mistergrumpy
|
| posted on 16/4/09 at 08:01 PM |
|
|
Speedo Healer
I'm trying to set up my newly acquired speedo healer V3. for my ZX9 engine and I've been on the online calculator but I'm stuck. I
just don't get it. It's asking for sprocket sizes and, well I have none.
Can anyone help or do they know what the number is I need for a ZX9 with 3:62:1 diff?
Oh I have done a search but as is the fashion all the results are for R1's
[Edited on 16/4/09 by mistergrumpy]
|
|
|
|
|
Andy W
|
| posted on 16/4/09 at 08:07 PM |
|
|
58/16 or 29/8 are very close to 3.62, should be a start for you
Andy
|
|
|
mistergrumpy
|
| posted on 16/4/09 at 08:12 PM |
|
|
I've no idea how to calculate them but you've just done it for me fellas thanks.
|
|
|
Andy W
|
| posted on 16/4/09 at 08:13 PM |
|
|
Yes but I missed the 13:47, in the rush
Andy
|
|
|
A1
|
| posted on 16/4/09 at 09:04 PM |
|
|
im not sure which speedohealer i have, but the sum for me is (actual / shown -1) * 100
|
|
|
hobbsy
|
| posted on 16/4/09 at 10:39 PM |
|
|
You could also just grab a GPS and then compare indicated to actual speed to get the ratio. Thats what I did.
|
|
|
mistergrumpy
|
| posted on 17/4/09 at 02:11 PM |
|
|
Ah but if I did that I'd have to drive the thing and if i had to drive it I'd have to hire a trailer and borrow a car to get the thing to
private land and so on.
quote:
16 x 3.62 = 57.92, 8 x 3.62 = 28.96 and 13 x 3.62 = 47.06
Paul. The only number who's origin I understand throughout all that is 3.62 sorry.
|
|
|
