teegray19
|
| posted on 7/7/14 at 11:16 PM |
|
|
zzr1100 engine, zx12r clocks tacho mis read
as above,
bit of a long shot - has anyone used a zzr1100 engine with a set of zx12r clocks?
everything works spot on but the tacho miss reads slightly, its about double on clocks below 6k rpm engine speed... then half after this.
i presume, that the zx12r uses a feed from the ecu where as I'm taking it from the - side of 1 coil.
interesting to get some feed back as i know some people have used the zx12r engines etc...
Built Formular 27 with 1600cc crossflow, 1700cc 0 miles crossflow, Kawasaki ZZR1100
|
|
|
|
|
kj
|
| posted on 8/7/14 at 07:37 AM |
|
|
Got a spare set of zx9 if they any good on e bay at the moment
Think about it, think about it again and then do it.
|
|
|
teegray19
|
| posted on 8/7/14 at 05:04 PM |
|
|
I've got the original zed clocks, just need to make a signal generator to change he pulses.
Cheers for the offer tho!
Built Formular 27 with 1600cc crossflow, 1700cc 0 miles crossflow, Kawasaki ZZR1100
|
|
|
