Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Ford Sierra light switch ???
Johnmor

posted on 23/9/20 at 03:57 PM Reply With Quote
Ford Sierra light switch ???

Hi All



I have a sierra light /wiper switch and I found a copy of the wiring connections for the switch (on here ) so i can see where the connections fit however as i work through the connections i can’t figure out how it switches from side to headlights

It’s fairly clear that in the first raised position I have a contact from the +v feed to the side lights out, that’s fine and easy

The arm then moves up again to trigger headlights and i can find no difference in all the terminals , the side lights are still getting +v but nothing to see how it then switches the head lights. No other terminal in the switch receives any +v

I’m not a electrician so plain English will be most helpful,

Im sure im just being dumb , but cant figure how it then triggers headlights

Thanks in advance

john

View User's Profile E-Mail User View All Posts By User U2U Member
Deckman001

posted on 23/9/20 at 04:07 PM Reply With Quote
Hi John, this reply probably isn't going to help but you will need to know which type of switch and loom you have as there are different types of switches, some being negative based and some being positive based. The loom will also need be based on that switch type.

Also am assuming you are using a sierra steering column so the switches are plugged into at the rear and should then feed relays depending on the load of the lights.

Jason

[Edited on 23/9/20 by Deckman001]

View User's Profile View All Posts By User U2U Member
Davedew

posted on 23/9/20 at 04:15 PM Reply With Quote
Hi John,

If using the later type switched earth light switches, when you move the right hand stalk up into position 2, ie headlights on, it connects pin 56 of the light switch to pin 31 (earth) of the light switch.

Pin 56 on the right stalk then links across to pin 56 of the left hand stalk.
Main beam relay earth through pin 56A, dipped beam through pin 56B of the left hand stalk.

HTH

Dave






View User's Profile View All Posts By User U2U Member
Johnmor

posted on 23/9/20 at 04:25 PM Reply With Quote
Thanks for the replys

i suspected an earth switch solution, but i was getting lost in tracing the terminals,
i noticed the dip , full beam uses an earth solution so was hoping it was something like that

thats again

back on track!!!

john

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.