Board logo

Wanted:- Rose Joints / Rod Ends local to Macclesfield..
Steve Hignett - 19/10/11 at 09:57 PM

Hi All,

I don't suppose anyone knows of a supplier/shop that sells the above that is local to the Macclesfield, Cheshire, area at all please?

Potentially need them for the wkend so McGills is out really...

Cheers in advance,
Steve


owelly - 19/10/11 at 10:31 PM

I've just googled bearing stockists in Macclesfield and come up with dozens. Not all in Macclesfield but not too far away. Try BSL Brammer as they carry stock and can look at thier other branches to see if they have some.

http://www.brammer.co.uk/uk/north_west_region.aspx

[Edited on 19/10/11 by owelly]


danny keenan - 20/10/11 at 07:31 AM

what size are you after steve?

im going over to manchester airport tomorrow and could meet up with you.iv got lots of m12 rose joints

give me a call if they are any good

thanks danny


Neville Jones - 20/10/11 at 10:29 AM

quote:
Originally posted by danny keenan
what size are you after steve?

im going over to manchester airport tomorrow and could meet up with you.iv got lots of m12 rose joints

give me a call if they are any good

thanks danny


M12!!!! What are you building? Heavy earthmoving machines!


Steve Hignett - 21/10/11 at 11:39 PM

quote:
Originally posted by danny keenan
what size are you after steve?

im going over to manchester airport tomorrow and could meet up with you.iv got lots of m12 rose joints

give me a call if they are any good

thanks danny


Cheers Danny, although M12's are handy for where they are needed, I'm just making a Gear change for a friend, so M6/8's are what I'm after!

ps, Ian was over today and picked up the arches for you! (Nice bloke - mad keen on his new chassis!) He's only half a dozen miles away, I think I'll try to get a closer look some Saturday morning soon!

Cheers Owelly, I will Google them for a an address and tell my friend...