Board logo

Quick Question
omega0684 - 4/6/12 at 10:30 AM

Hi All,

Can anyone tell me the bolt size and thread of the prop shaft bolts that secure the prop to a sierra diff pinion?

Alex

blakep82 - 4/6/12 at 10:38 AM

its an M10 thread, but very fine. M10x1 i think

Mark Allanson - 4/6/12 at 10:44 AM

quote:
Originally posted by blakep82
its an M10 thread, but very fine. M10x1 i think


Confirmed, 8.8 is too weak though, I think mine were 10.9

mcerd1 - 4/6/12 at 10:49 AM

yeah 10 x 1.0mm, ford use 10.9's

dax use 12.9 cap heads (allen key ones) 20mm long fully threaded if I remember right


I might still have a spare set of the ford ones if you need them Alex

[Edited on 4/6/2012 by mcerd1]

RichardK - 4/6/12 at 11:18 AM

Got mine from Burtons

Linky

Love

Rich

xx

clairetoo - 4/6/12 at 11:31 AM

Pretty sure I will have something in the shed.......KL flywheel bolts are M10x1 , and I may even have some Ford prop bolts somewhere..................