omega0684
|
| posted on 4/6/12 at 10:30 AM |
|
|
Quick Question
Hi All,
Can anyone tell me the bolt size and thread of the prop shaft bolts that secure the prop to a sierra diff pinion?
Alex
I love Pinto's, even if i did get mine from P&O!
|
|
|
|
|
blakep82
|
| posted on 4/6/12 at 10:38 AM |
|
|
its an M10 thread, but very fine. M10x1 i think
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Mark Allanson
|
| posted on 4/6/12 at 10:44 AM |
|
|
quote:
Originally posted by blakep82
its an M10 thread, but very fine. M10x1 i think
Confirmed, 8.8 is too weak though, I think mine were 10.9
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
mcerd1
|
| posted on 4/6/12 at 10:49 AM |
|
|
yeah 10 x 1.0mm, ford use 10.9's
dax use 12.9 cap heads (allen key ones) 20mm long fully threaded if I remember right
I might still have a spare set of the ford ones if you need them Alex
[Edited on 4/6/2012 by mcerd1]
-
|
|
|
RichardK
|
| posted on 4/6/12 at 11:18 AM |
|
|
Got mine from Burtons
Linky
Love
Rich
xx
Gallery updated 11/01/2011
|
|
|
clairetoo
|
| posted on 4/6/12 at 11:31 AM |
|
|
Pretty sure I will have something in the shed.......KL flywheel bolts are M10x1 , and I may even have some Ford prop bolts somewhere..................
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
