ChrisW
|
| posted on 9/5/12 at 03:50 PM |
|
|
Surely there is someone who rebuilds superchargers in the UK?
As subject, other than 'UK Blowers' who are only interested in screw-type 'chargers, is there anyone in the UK that can rebuild my
Eaton for me? All my google searches have drawn a blank, I'm only getting the DIY instructions, and I think I've done enough damage
already.
Can anyone point me in the right direction?
Chris
My gaff my rules
|
|
|
|
|
stevebubs
|
| posted on 9/5/12 at 04:22 PM |
|
|
Turbo Technics?
also Bennett Racing
http://www.bennettracing.co.uk/#/supercharger-roots/4525194989
I would guess Rotechniks would know where to go, also
http://www.rotechniks.co.uk/
|
|
|
ChrisW
|
| posted on 9/5/12 at 04:53 PM |
|
|
I'd found Bennett Racing, but nowhere on the site could I find an address. Also it looks like they only do big stuff. Have dropped them an
email anyway but I'm not hopefull.
Anyone else?
Chris
My gaff my rules
|
|
|
mark chandler
|
| posted on 9/5/12 at 04:59 PM |
|
|
You may come across a chap in Glasgow, all looks good until you see recent feedback where he has pocketed money.
When I stripped mine I got the bits and pieces from the states as could not find anyone local. If you join some of the yank forums they can provide
bearing part numbers for upgrade timkin bearings etc, if you want it recoated you may struggle in the UK, I guess they just bolt on a new one.
Real Steel in Uxbridge may be able to help as they deal in yank stuff.
Regards Mark
|
|
|
ChrisW
|
| posted on 9/5/12 at 05:02 PM |
|
|
I need a replacement bearing carrier plate. Problem is I'm not 100% sure which generation of charger it is, and it could turn out quite
expensive working it out!
Chris
My gaff my rules
|
|
|
bi22le
|
| posted on 9/5/12 at 05:32 PM |
|
|
Have you tried the BMiniW websites and forums?
They must know somebody that gets involved in Eaton superchargers.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
stevebubs
|
| posted on 10/5/12 at 07:43 PM |
|
|
http://www.stormdevelopments.co.uk/services/g-lader-refurbishment.html ... vortech not eaton, though
[Edited on 10/5/12 by stevebubs]
|
|
|
ChrisW
|
| posted on 10/5/12 at 08:41 PM |
|
|
I need Eaton!
Looking likely I'll send it off to Bennett Racing, unless anyone has any other suggestions?
Chris
My gaff my rules
|
|
|
