Board logo

MX5 Manual Steering Rack Clamp
maccmike - 18/3/15 at 07:19 AM

Hi All.
I have changed the PS setup for a manual one on my project.
Unfortunately the passenger side clamp that holds the rack to the subframe is a different size.
Does anybody have one?

coozer - 18/3/15 at 02:25 PM

Would have been easier to convert the pas rack? Or, was there something wrong with it?

I was under the impression the pas rack has a quicker ratio?

maccmike - 18/3/15 at 04:24 PM

Hi. I believe it does too but thought if Im going to do it, I may as well do it properly.
Didnt want to depower the rack as Im not sure the IVA man would be happy.

maccmike - 22/3/15 at 08:51 PM

I have made a clamp and will post a picture the build blog

Slimy38 - 22/3/15 at 09:10 PM

quote:
Originally posted by maccmike
Hi. I believe it does too but thought if Im going to do it, I may as well do it properly.
Didnt want to depower the rack as Im not sure the IVA man would be happy.


P00, that's kind of what I had planned to do. I might have to look a bit closer as to whether it will be acceptable.

maccmike - 22/3/15 at 11:31 PM

prob best to leave it until after the iva then.

[Edited on 22/3/15 by maccmike]