First post on here. Hi all.
Just bought back my old fisher fury I built a few years ago. It's a bit tatty now but can't afford to go mad on it for now.

But question is. Foes anyone make a front splitter for the fury. I made one from ally but you can't open the bonnet once it's fitted. Would like a small one you can atleast open the bonnet if I do a track day.

Cheers

You need to change the way the hinges work and then you can run a normal splitter....

Look what Matt did here

http://jpsc.org.uk/forum/viewtopic.php?f=4&t=1098&start=0&hilit=splitter&sid=d44274d9ed6f9ffc389b39dd7c48d4b0

and then you can build me one

It's not opening for me.

It's working. Cheers

Try here too linky

Hth

New year new bonnet hinge. Thanks fellas

If you're remaking the bonnet hinge, how about incorporating this..

https://www.youtube.com/watch?v=n_H8bK8o3UM&feature=youtu.be&t=25m10s

https://www.youtube.com/watch?v=n_H8bK8o3UM&feature=youtu.be&t=22m5s

If I remember correctly, the reason the bonnet wouldn't open was the splitter was FECKING HUGE !

[Edited on 31/12/14 by adithorp]

Was a big un