Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: GTIR Plenum?
johnny chimpo

posted on 29/3/20 at 10:42 PM Reply With Quote
GTIR Plenum?

Anyone got a Gtir plenum they are willing to part with?

Only need the top piece as it’s for a custom turbo plenum, but would be willing to take the whole thing complete if it was available.

I know these were everywhere a few years ago, but seem to be a struggle to find these days.

Thanks

G

View User's Profile View All Posts By User U2U Member
Charlie_Zetec

posted on 30/3/20 at 12:26 PM Reply With Quote
I was watching some on eBay not too long ago, and they seem to start about the £150 mark and sell about £200 (for just the top section). I did se a complete set of throttle bodies and plenum, but that was about £300 - and most breakers don't want to split them.

They do still crop up for sale, but not very often....





Artificial intelligence is no match for natural stupidity!

View User's Profile View All Posts By User U2U Member
SteveRST

posted on 30/3/20 at 04:02 PM Reply With Quote
I've got a complete setup with the bodies but no injectors.
As you can see, some surface corrosion on the throttle bodies and a few patches or orange paint (?), but they'd clean up nice.
Can be posted to you for £250.








I bought it for my zetec turbo a few years ago, but never did anything with it.
I've subsequently acquired just the plenum cover and some laser-cut spacers, and still meaning to get round to building a custom plenum too at some stage!

Steve

[Edited on 30/3/20 by SteveRST]

View User's Profile View All Posts By User U2U Member
johnny chimpo

posted on 30/3/20 at 04:42 PM Reply With Quote
Thanks for the replies guys.

It’s just the plenum cover I am looking for. When I start getting up to £250 and above then It pushes me more towards the route of getting a full custom plenum made. Was hoping the gtir plenum top would be a cheap way to do things!

View User's Profile View All Posts By User U2U Member
Shooter63

posted on 30/3/20 at 06:48 PM Reply With Quote
Look online for a company called ikengineering, they do various plenum options, if think the chances of finding a GTIR plenum top are between Bob and no, the Sierra cossy ones come up quite often and might do the job

Shooter

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.