I have recently sold my car, so it's time to clear out some of the spares and bits that I have accumulated over the years.

I have started with the larger bits, I will list the smaller bit once I have gone through all my boxes.


Welder £250
Clarke 151TE, comes with brand new welding trolley, unused bottle of gas (Adams gas) and new regulator, new welding helmet, new welding gloves, unused brush,...
I recently gave it a full once over and replaced various bits and piece, it is unused since then.



Draper engine crane £75


Clarke engine stand £30


Sierra 7" LSD £400


Type 9 gearbox £350


Type 9 bell housing £30


Sierra rear hubs and callipers for disc conversion £100


Sierra rear axle parts inc, non-LSD diff, half shafts, hubs and backing plates £120


Sierra steering parts including column, link and switches £100


Cortina front uprights x2, hubs x3 and calliper x2 (some pistons missing) £80


Dash, approx 109cm wide, good condition, just some light storage marks £30


Various metal offcuts includes over 1m each of 3mm flat bar, 19mm sq tube and 1" tube £10


Various joints, unknown condition - free




These are all the larger bits I have and are collection only from Didcot

Any questions let me know
Lars

[Edited on 3/4/22 by Lars]

Clarke 151TE good machine for home welding. Have one here, works well.

Interested in the Mig welder, have next week off to collect.

All yours snapper, just sent a U2u

Also interested in crane and engine stand.

Do you still have the Cortina uprights and Sierra diff/hubs?

I might be over Didcot way on Saturday 23rd.

[Edited on 21/4/22 by Furyous]

Cortina uprights and Sierra diff/hubs are still available.

Crane, stand, welder, rear disc hubs/callipers and joints are gone.

Send me a u2u if you want to drop in and have a look

Lars