lotusmadandy
|
| posted on 27/8/09 at 01:24 PM |
|
|
zetec sump
Guy's, i am preparing to fit a modded
sierra cvh sump to my zetec engine but
don't have the steel spreader plates that fit between the sump and bolt heads.
My question is this; will it be ok if i fit it without, or am i asking for trouble?
Alternatively has anyone got a pair they would like to swap for beer tokens?
Andy
|
|
|
|
|
Bluemoon
|
| posted on 27/8/09 at 01:39 PM |
|
|
Asking for trouble....
Dan
|
|
|
big_wasa
|
| posted on 27/8/09 at 01:52 PM |
|
|
It will leak as its only ~1.5mm thick and will distort when you nip it up.
What engine are you fitting it to ? I am buggered if I can get mine to fit a blacktop
|
|
|
lotusmadandy
|
| posted on 27/8/09 at 02:03 PM |
|
|
Hi Warren,
Its going on a silvertop,other than filing
out the holes a little it fits straight on.
Andy
Oh and thanks for the advice lads.
Now all in need is a pair of plates.......
[Edited on 27/8/09 by lotusmadandy]
|
|
|
handyandy
|
| posted on 27/8/09 at 02:05 PM |
|
|
Andy,
sorry mate, forgot about those plates,
as i had to halt my engine rebuild for a while.
i have the 2 sets of spreader plates, can i get back to you by saturday to let you know which set i don,t need?
you are welcome to the ones that i don,t need.
sorry for brain fade 
cheers
andy
|
|
|
big_wasa
|
| posted on 27/8/09 at 03:52 PM |
|
|
Andy, Yep ive fitted a couple to silver tops but cant get it on the black top.
Pick up fouls the crank webs and no provision for bolting the pick up down either.
|
|
|
