DIY Si
|
| posted on 26/5/08 at 07:54 PM |
|
|
laser cutting near banbury/daventry
Pretty much as the title says, any one know of a laser cutting place near the oxon/northants border that can work from a paper template? I need to get
some rear wheel arch protectors cut in stainless, and all the off the shelf ones I've found either don't match the shape I want, or are
too little.
[Edited on 26/5/08 by DIY Si]
|
|
|
|
|
andyw7de
|
| posted on 26/5/08 at 08:20 PM |
|
|
Just taken delivery of a new waterjet cutting machine, if you want to sent me a copy of your template and what material you want Ill see what i can
sort out. Usually need a dxf drawing but will try and draw it as close as possible.
Let me know
Cheers
Andy
|
|
|
DIY Si
|
| posted on 26/5/08 at 08:44 PM |
|
|
I could probably do a drawing on the computer if it would help? I only have the Office stuff and paint though.....
It needn't be in anything much more than 1mm sheet, as it will need to bend slightly to match the wheel arch.
|
|
|
chris_smith
|
| posted on 26/5/08 at 08:48 PM |
|
|
if andy cant help ill do it on the laser machine at work just pay for postage and materials
|
|
|
NeilP
|
| posted on 26/5/08 at 08:54 PM |
|
|
Gents,
Lunatic question - Can you cut laminate glass using either waterjet or laser?
Assuming that you could but that it's going to bugger up the glass plastic interface?...
Small project in mind
Cheers, Neil.
If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!
|
|
|
chris_smith
|
| posted on 26/5/08 at 08:57 PM |
|
|
neil i dont know the answer cos i aint the laser operator but ill ask the team tomorrow if ya like and post here tomorrow night
|
|
|
graememk
|
| posted on 26/5/08 at 09:20 PM |
|
|
me to when i get home to the UK i need some bits cutting for my indy and a new shop sign
|
|
|
andyw7de
|
| posted on 27/5/08 at 07:36 AM |
|
|
quote:
Originally posted by NeilP
Gents,
Lunatic question - Can you cut laminate glass using either waterjet or laser?
Assuming that you could but that it's going to bugger up the glass plastic interface?...
Small project in mind
Cheers, Neil.
waterjet will cut virtually any material up to 150mm thk only thing i know it wont cut is toughened glass.
Ive got some 10mm laminated here so i'll try it when the machine is fully commissioned.
Andy
|
|
|
NeilP
|
| posted on 27/5/08 at 05:43 PM |
|
|
Cheers, Andy - You're a star...
If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!
|
|
|
