any one know where i can get a pair of gears about 30mm dia to give a 1:1 ratio

Cheers Tim

[Edited on 10/3/04 by timf]

Try a model shop or ebay

how about these

gears

Try HPC gears

www.hpcgears.com

no connection but soon to be a satisfied customer (hopefully)

quote:

---

Originally posted by timf
any one know where i can get a pair of gears about 30mm dia to give a 1:1 ratio

Cheers Tim

[Edited on 10/3/04 by timf]

---

Alan not steering the wrong way yet
making a beading tool and need a pair of gears to drive the rollers

Good...

Yeah, I agree with Jim...I've used HPC in the past, they have quite a catalog of reasonable off the shelf gears IIRC

Have a look in RS I think they do a limited range which might help.

Gordon

i buy gears for a living and we also make them hpc will give you good stuff at the right price dont select them by od you should measure the center distance between the shafts and pick a set that will run at that center distance
also what power and how much use are they going to get this will help chose material and face width
chers dave