Anyone have any ideas on how to mount my digital vid cam on the indy
Its an alba tdv341 from argos my good lady got me one from nottingham for only £16.99 with a 2 gig SD card included, but heres the thing there is no screw thread mount in the bottom




[Edited on 8/11/09 by afj]

[Edited on 8/11/09 by afj]

[Edited on 8/11/09 by afj]

[Edited on 8/11/09 by afj]

[Edited on 8/11/09 by afj]

I used a foam lined chopped up biscuit tin fastened to the roll hoop with an exhaust clamp. the camera was held in with cable ties.

Can't remember what type of biscuits they were though - sorry

cant u use a suction mount ie Tom Tom type and attach the camera to it you can then locate it on yor scuttle. Anothe idea is to clamp a flat bar (made into a T) to your roll bar using Jubilee clips, you then have a flat surface to strap your camera

duck tape and cable ties!!

are you sure that particular camera will take the footage the camera spec states video clip and no sound ??

Has it got a standard screw type camera mount on the bottom.

Mine has so I bought a camera mount for £3 like this: link

and modified it to bolt onto the roll bar.

Works great!

Stu

Pity your not using a bullet cam I found a really good locost mount I use a Microphone holder threaded into the roll bar. Bullet cam fits perfectly

the video quality and sound are quite good for a cheapo cam but no its not got that screw thread on the bottom