i need someone to fit a stainless steel flue for a new wood burner i've bought but they are to be hetas registered help please or recomendation
peterborough area

thanks

do it yourself and dont tell anyone....


Fireboard and fire cement required.

If you're doing it yourself you don't need to be registered only if you're charging for it.

I fitted my own fireplace today.....

Yep me too.
DIY

I've had a flue fitted recently - there are 2 official routes. The first is to use a HETAS installer, who takes responsibilty for meeting building regs.

The alternative is to use an ordinary builder (or do it yourself) but you'll have to get a building inspector in to check the installation of the hearth, flue and the surrounding materials around the stove.

I went the HETAS route for simplicity's sake.

What size burner is it ?

Only have to involve HetasBuilding Control if it's over 5Kw.

I've got two fitted in my house.
I did the 1st one by myself as it was only 5KW.
Got a Hetas engineer to fit the 11KW with built in boiler and got a thermal store installed athe same time.