Board logo

OT: 3cx SIP PBX
mad4x4 - 29/10/12 at 10:32 PM

Long shot but any one know what this means


quote:

[CM102001]: Authentication failed for AuthFail Recv Req REGISTER from 192.168.0.15:49717 tid=



3cx PBX using a DIDlogic DID....

ChrisW - 30/10/12 at 09:30 AM

quote:
Originally posted by mad4x4
Long shot but any one know what this means


quote:

[CM102001]: Authentication failed for AuthFail Recv Req REGISTER from 192.168.0.15:49717 tid=



3cx PBX using a DIDlogic DID....


At the risk of teaching you to suck eggs, and with the caveat that this is knowledge from Asterisk not 3CX....

The first thing an IP phone will do is REGISTER with the PBX which tells it where it can be found on the network (ie it's IP address), what capabilities it has, etc. The PBX will return information like if there are any voicemails waiting so the phone can put it's message waiting indicator on.

I'm assuming that the message is an authentication failure from one of your phones trying to do that which I guess means either you've got a phone on the network that isn't configured on 3CX or someone has 'fat fingered' a username or password somewhere along the lines of setting that phone up.

Sorry if this is obvious!

Chris

mad4x4 - 30/10/12 at 03:15 PM

That what I thought but the phones (softphones) are Autoprovisioned.....

ChrisW - 30/10/12 at 07:49 PM

quote:
Originally posted by mad4x4
That what I thought but the phones (softphones) are Autoprovisioned.....


I'd guess it's a problem with the autoprovisioning then!

Chris