Board logo

Spotted on my way to work...
ChrisW - 26/11/04 at 12:46 PM



Yes, those are breezeblocks!

Chris


scoobyis2cool - 26/11/04 at 12:55 PM

Good to see someone taking safety seriously...

A bus driver was killed near me the other day because the bus he was working under rolled back and fell on him, just shows how important it is

Pete


DarrenW - 26/11/04 at 01:00 PM

ChrisW,

It looks like you were spotted when taking the photo, did you get shouted at or chased?????

You could double up for Roger Cook in your spare time (did i get his name right?)


Cita - 26/11/04 at 03:19 PM

The margin between courage and insanity is sooooooooooooooooooo small


john_p_b - 26/11/04 at 03:43 PM

trusting his life to compacted ash................


Metal Hippy - 26/11/04 at 08:15 PM

I'm sorry, but that calls for a:

Twaaaaaaaaaaaaaaaaat


Peteff - 26/11/04 at 08:48 PM

I reckon those are concrete blocks, breeze are 3 times dearer now. They've twigged to their extra insulating properties and put them up accordingly. Not bad for something made from power station waste.


MikeP - 26/11/04 at 09:24 PM

What's a breezeblock?


stephen_gusterson - 26/11/04 at 09:36 PM

we dont make houses out of wood in the uk like you do in north america.

we usually have a brick outer wall, then a 1 inch or so gap, and an inner wall. These are, in modern houses, usually breezeblocks.

Basically aerated concrete, approx 4x the area of a facing brick, often with two hollow shafts running thro the centre. imagine a H shape, with the ends colosed off, as a plan view.

light, and provides further insulation cos of the air spacing inside.

They are a bit brittle and can crumble more easily than a facing brick.... which is why you dont want a car on them!

atb

steve


MikeRJ - 26/11/04 at 10:49 PM

I think they are called cinder blocks in the US.


Peteff - 26/11/04 at 10:50 PM

Breeze is light and quick, brickies like it better than concrete blocks. Thermalite is another version, even lighter. Available in 4", 6" or 9" thick with cavities or without.


john_p_b - 27/11/04 at 10:11 AM

the company that owns the workshop where i work also owns a block plant, i was down there one day on a breakdown with one of the trucks so decided to get a tour of the plant, ultimatly impressive stuff, the plant foreman pointed out each palet of blocks coming off the line was worth a 13 quid and it pushed a pallet out every 18 seconds.....just roughly working it out that place should make just over 2.5k per hour! i want a pay rise!


stephen_gusterson - 27/11/04 at 12:14 PM

not quite breezeblocks (but may be similar materials )....

last time i was at the kellogg cerial factory in manchester 10 or so years back, they had 8 lines making cornflakes. They come out of the ovens on a belt about 2 ft wide, 5 ins deep, and 150 ft a min. and thats x8.

a lot of people eat those things!

atb

steve

[Edited on 27/11/04 by stephen_gusterson]


wilkingj - 27/11/04 at 11:28 PM

They are also made from ASH from power stattions, as a mate's company had the contract to shift the ash. its mixed with concrete and makes the blocks. (Thermalite)

the USA Cinder block is probably the same thing.

but what a TWAT,... where are his cheapo axle stands... he obviously values his money over his life.


scoobyis2cool - 28/11/04 at 02:11 AM

I got my axle stands and trolley jack for £30 from Halfords, a small price to pay compared to your life!

Pete