Variety of bits for Ford Sierra Pinto/CVH

Most of the parts came from a Ford Sierra 1.8 CVH J reg which I dismantled for a kit car project. These parts were either not used and were too good to scrap with the car. The other bits are from a 2l Pinto. All parts were functioning when removed 4 months ago and they have been kept in a dry place so they should be fine.

I have photos of all the parts, so should you want a look just email me.

Call or email Martin on 07967 017 219 / mpett@qinetiq.com.

LIST OF PARTS


5x 14”Steel wheels and tyres average to good tread remaining

1x Bosch distributor (light beam cutting) for use with 2l Pinto EFI engines

4x (Brand New) NGK spark plugs for use in Ford engines (small thread for cross flow engines I think) Part Number BP7ES

1x Pinto Alternator with pulley for power steering pump (BOSCH)

1x CVH Alternator

1x Exhaust manifold and down pipe (CVH)

1x Starter motor for Ford CVH (type 9 gearbox)

1x Clutch cable for type 9 gearbox

1x Sierra heater fan

1x Set of indicators (Near/curb side average condition, drivers side A1)

1x Set of Smoked Sierra Tail lights and number plate backing (A2 condition)

1x Set of Sierra indicator stalks

1x Manual Sierra steering rack with good boots and trackrod ends

1x Pinto EFI injection manifold + New Gasket

1x Sierra wiper motor and wiper arm mechanism


1x Ford Sierra Bonnet White (good condition)

4x Dellorto DHLA 30mm chokes

Cheers,

Martin