coozer
|
| posted on 18/9/09 at 06:38 PM |
|
|
Any boiler engineers?
Our combi, a Vokera Linea has lost a bit water pressure on the gauge since not being used for heating since about April, now when I open the fill loop
valve theres no movement of water into the system..
There is water pressure in the fill loop up to the valve on the CH....
Any ideas?
Steve
1972 V8 Jago
1980 Z750
|
|
|
|
|
liam.mccaffrey
|
| posted on 18/9/09 at 06:48 PM |
|
|
Sorry this is a pet hate of mine. Someone who installs and repairs domestics heating system is NOT a boiler engineer!
Whats wrong with being a technician?
This isn't a dig at you mate, I hope you get your problem sorted
Build Blog
Build Photo Album
|
|
|
t16turbotone
|
| posted on 18/9/09 at 07:12 PM |
|
|
probaly the non return valve stuck, which is usually incorporated in filling loop
|
|
|
jonesier1
|
| posted on 18/9/09 at 07:20 PM |
|
|
flow valve stuck ?
im in my own little world...its ok though they know me there
|
|
|
coozer
|
| posted on 18/9/09 at 08:03 PM |
|
|
Obviuos, what I want to know is how to fix it...
1972 V8 Jago
1980 Z750
|
|
|
maskell01
|
| posted on 18/9/09 at 08:21 PM |
|
|
1)Take the massive hammer out of ur tool box.
2)Raise the said hammer high above your head
3)Swing the hammer,aiming it at the problematic isolation valve.*
*At this point a noise for effect is optional,something like "UGGGGGGH" usually does the job and makes it sound manly too!
If this doesn't do the job run like buggery to the nearest phone as you probably just split a pipe you didnt want to!
|
|
|
coozer
|
| posted on 18/9/09 at 08:49 PM |
|
|
Right, I'll phone the gas board.....
1972 V8 Jago
1980 Z750
|
|
|
NS Dev
|
| posted on 18/9/09 at 10:01 PM |
|
|
well, if you can build a car..............
sorry!
If the main system is holding some pressure (i.e. not zero) then its pretty likely the fill valve. In which case the only answer is turn the cold
water supply off at the stop tap, dismantle the filling loop, find the fault and replace the appropriate valve.
Strange one though, which i guess is why you asked!
I'm no boiler engineer!! I don't like to pay somebody else to do my fault finding either though, they always take longer, do a worse job
and cost a lot!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
Stott
|
| posted on 18/9/09 at 10:12 PM |
|
|
does this help, 6.23?
http://vokera.excaliburstudio.co.uk/wp-content/uploads/2009/04/linea-he-combi-boilers-installation.pdf
Paying someone is always the last resort 
|
|
|
