l0rd
|
| posted on 6/2/10 at 10:22 PM |
|
|
Should I or Should I NOT?
Need to cut my desk so i can put it in the car to take it for recycling.
Now, I have a Jigsaw which will make my life easier but:
I only have some HSS blades for steel.
Should i use these? or Do i need to buy new ones to cut it off?
|
|
|
|
|
Benzine
|
| posted on 6/2/10 at 10:25 PM |
|
|
I use metal blades for wood all the time when I can't be arsed to change blades  Takes a lot longer though. For a desk I'd use a decent
hand saw
|
|
|
skinned knuckles
|
| posted on 6/2/10 at 10:26 PM |
|
|
you can use the HSS blades, but they will get very hot, clog up and be quite slow in comparison to dedicated wood blades.
personally i would use an old fashioned hardpoint handsaw.
A man isn't complete until he's married, then he's finished
|
|
|
JoelP
|
| posted on 6/2/10 at 10:29 PM |
|
|
axe. The original tool for cutting wood 
|
|
|
gazza285
|
| posted on 6/2/10 at 10:30 PM |
|
|
I'd not bother with the car, the van's much bigger. How about Freecycle?
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
|
LBMEFM
|
| posted on 6/2/10 at 10:30 PM |
|
|
Sledge hammer !!!!!
|
|
|
l0rd
|
| posted on 6/2/10 at 10:33 PM |
|
|
Well, my hacksaw is 120 miles away. Don't have anything else to cut wood.
|
|
|
mookaloid
|
| posted on 6/2/10 at 10:39 PM |
|
|
Simples
"That thing you're thinking - it wont be that."
|
|
|
Danozeman
|
| posted on 6/2/10 at 10:44 PM |
|
|
jump on it!!
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Thinking about it
|
| posted on 6/2/10 at 10:45 PM |
|
|
Freecycle. Save the trip to the tip.
|
|
|
l0rd
|
| posted on 6/2/10 at 10:48 PM |
|
|
quote:
Originally posted by mookaloid
Simples
+1
Well, the desk is 80cm wide, 1.8m long and 2cm thick.
This could well be my option.
|
|
|
Steve Hignett
|
| posted on 6/2/10 at 11:37 PM |
|
|
me personally? I'd just lob the first 4foot of my cock on it, but then I am talented in these areas of cock size and
forumtimewasteage...........
|
|
|
Ninehigh
|
| posted on 6/2/10 at 11:48 PM |
|
|
Your cock shouldn't have any feet 
If you're going to freecycle why not just ebay it yourself and pocket the money?
Have seen a few people take things off freecycle and then the exact same item's on ebay the same day 
|
|
|
t.j.
|
| posted on 7/2/10 at 12:03 AM |
|
|
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
l0rd
|
| posted on 7/2/10 at 12:06 AM |
|
|
Can't poot it on ebay or freecycle as I have had one corner cut allready in order to fit better my last flat.
|
|
|
Snuggs
|
| posted on 7/2/10 at 07:49 AM |
|
|
Just leave it outside and it will disappear in an hour
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
|
eznfrank
|
| posted on 7/2/10 at 08:52 AM |
|
|
Is it chipboard? If so just stanley knife a line where you want to cut to split the laminate, lean against a wall and give it a good boot!!
|
|
|
speedyxjs
|
| posted on 7/2/10 at 09:08 AM |
|
|
Take it out into the street and drive into it. Should get it to small enough peices to fit into your car
How long can i resist the temptation to drop a V8 in?
|
|
|
MakeEverything
|
| posted on 7/2/10 at 11:03 AM |
|
|
Rage III?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
Angel Acevedo
|
| posted on 7/2/10 at 07:42 PM |
|
|
quote:
Originally posted by LBMEFM
Sledge hammer !!!!!
Wins by far!!!!
More fun....
Beware of what you wish.. for it may come true....
|
|
|
