TimC
|
| posted on 8/2/10 at 11:29 AM |
|
|
Brushed Stainless Splashback and 6" Trim Strip
Mornin' All
Any good locost sources for the above?
As well as a splash back (with a notch due to cupboard position,) I'm also looking for a 6" wide strip to go around the enture worktop
services. Any help appreciated.
TC
|
|
|
|
|
boggle
|
| posted on 8/2/10 at 11:39 AM |
|
|
where i work we have an ebay shop that does these...
look on ebay for profilemen....
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
welderman
|
| posted on 8/2/10 at 09:12 PM |
|
|
me
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Jasper
|
| posted on 9/2/10 at 12:47 PM |
|
|
Are you sure? That will need a lot of polishing 
If you're not living life on the edge you're taking up too much room.
|
|
|
