PSpirine
|
| posted on 21/4/10 at 06:44 PM |
|
|
Ello everyone! Newbie here
Hi everyone,
Thought I'd start building up my post counter with an introduction!
I've been reading this forum for about 4 years now, and know for a fact that I have registered before, but as I can't for the life of me
remember the email address or username (let alone the password!) I thought I'd register again. I'd hardly posted anyway.
It's an absolutely fabulous bank of knowledge, so I thought it only right to contribute straight from joining.
I'm hoping to start building a Haynes roadster in the next 3-4 months, as I'm planning on designing a car from scratch over the next 2
years or so, and this would be a good step (I've built up enough road cars and designed a few suspension and engine bits here and there but this
will be a first ground-up build). I'm hoping to keep it really cheap, and use Sierra running gear, but with a SR20DET engine/gearbox (more due
to the fact that I know these engines very well, rather than the power benefit).
Step one is to get my 1964 Land rover in usable condition, as I'm sure it'll be rather useful for carrying all the random bits.
I've only got a single garage (and a rather tight one at that), so no luxuries like those that have double garages and mills/lathes etc. But it
does have power and light so that's a big step up from my previous one 
I'm hoping I'll be able to contribute something with my own knowledge, but as there's so many clever anoraks on here it may be a
while 
Hope to catch a kit car show (my first) sometime in the next few months!
Cheers,
Pavel
|
|
|
|
|
jacko
|
| posted on 21/4/10 at 06:49 PM |
|
|
Welcome to the mad house
Jacko
|
|
|
eddie99
|
| posted on 21/4/10 at 06:51 PM |
|
|
Welcome to Locostbuilders. As you said, lots of knowledge on here all willing to be shared!!!! Stoneleighs in a couple of weeks, might be worth you
heading there. Will meet lots of great people and different manufacturers. Are you going to build from scratch or get a kit or get chassis kit
etc..?
Ed
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
bi22le
|
| posted on 21/4/10 at 07:04 PM |
|
|
Welcome, welcome.
You know more than me already so you will definatly contribute something!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
PSpirine
|
| posted on 21/4/10 at 07:05 PM |
|
|
I was thinking of going for the ebay flat-pack chassis kit, as I've heard good things about the quality (and the seller).
However, ideally I'd like to get the steel in lengths for peanuts (off-cuts), and cut it from scratch. But if I had to buy the steel from a
supplier in lengths, I think it would be worth just going for the flat pack kit!
Stoneleigh is only bout 30 miles from here so it may be worth it indeed to go and check it out.
Pavel
|
|
|
blakep82
|
| posted on 21/4/10 at 07:32 PM |
|
|
was your last username Pavs by any chance?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
55ant
|
| posted on 21/4/10 at 07:47 PM |
|
|
hello, im pretty new here to, i think, and as your already aware this site is a bit of a lifesaver! have fun.
away from cars, now cycling and building TT bikes
|
|
|
LBMEFM
|
| posted on 21/4/10 at 07:51 PM |
|
|
Hello
|
|
|
koiking125
|
| posted on 21/4/10 at 07:57 PM |
|
|
Welcome onboard
MK Owners Club Member (Frosty) No.1159
|
|
|
eznfrank
|
| posted on 21/4/10 at 08:20 PM |
|
|
A garage with Lights AND power - bloody hell that's 5 star compared to mine!!
|
|
|
PSpirine
|
| posted on 21/4/10 at 08:40 PM |
|
|
Thanks for the warm welcome everyone!
yep, light and power is a nice upgrade from monster spiders, weeds growing out of the walls, and a lot of asbestos.
Blake.. D'oh!! Pavs is spot on! Shame I couldn't have asked that earlier before registering!
Pavel a.k.a Pavs
|
|
|
mangogrooveworkshop
|
| posted on 21/4/10 at 08:54 PM |
|
|
welcome
|
|
|
mangogrooveworkshop
|
| posted on 21/4/10 at 08:55 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=82280
|
|
|
handyandy
|
| posted on 21/4/10 at 08:57 PM |
|
|
quote:
Originally posted by PSpirine
I was thinking of going for the ebay flat-pack chassis kit, as I've heard good things about the quality (and the seller).
However, ideally I'd like to get the steel in lengths for peanuts (off-cuts), and cut it from scratch. But if I had to buy the steel from a
supplier in lengths, I think it would be worth just going for the flat pack kit!
Stoneleigh is only bout 30 miles from here so it may be worth it indeed to go and check it out.
Pavel
Hi Pavel,
welcome to the forum 
& thankyou for your kind words about the flat pack kits ( yes, thats me,)
good luck with your build.
cheers
andy
|
|
|
Paul TigerB6
|
| posted on 21/4/10 at 09:03 PM |
|
|
Welcome to the nut house Pavel.
here you go - you can pretend you have a friend and U2U yourself.
|
|
|
FFTS
|
| posted on 21/4/10 at 09:15 PM |
|
|
Wotcha
Chris.
|
|
|
RichardK
|
| posted on 21/4/10 at 10:15 PM |
|
|
Hi Ya, come and say hello to us all on the locost stand if you come to the Stoneleigh show which you really should try to as it the best one of the
year.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
