tegwin
|
| posted on 24/1/11 at 11:11 PM |
|
|
Anyone have eaglecad and know how to use it?
Does anyone have a legitimate copy of EagleCad and know how to use it?
I have a very simple PCB I need some help designing.... It only has 2 components (plus board).
I need the eaglecad file with all the asociated bits and pieces so I can get the boards manufactured
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
David Jenkins
|
| posted on 25/1/11 at 08:41 AM |
|
|
EagleCAD is free, isn't it? At least, the version they offered for free would do small PCBs. Worth a Google. (update:
EagleCAD - look for the link to 'freeware' )
Alternatively, you could try DesignSpark - also free, not so limited, and backed by Radiospares (amongst
others). Not tried it myself, but anything free is worth a try!
|
|
|
tegwin
|
| posted on 25/1/11 at 10:43 AM |
|
|
Sadly the company I want to use for manufacture will only accept eaglecad files from a proper "licensed" version of the software....
Dont think they take anything else 
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
coyoteboy
|
| posted on 25/1/11 at 12:01 PM |
|
|
Find a new company, there's loads about. Don't know anywhere using a "licensed" version of eaglecad, most use other packages
and just have the free version in case a strange requirement comes in.
|
|
|
mad4x4
|
| posted on 25/1/11 at 12:35 PM |
|
|
most pcb companies will accept gerber files and most pcb packages can create them
can the pcb company not do the design if it is 2 componets & board
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
