Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Mountain bike brakes problem
adam1985

posted on 17/3/11 at 10:16 PM Reply With Quote
Mountain bike brakes problem

Hi sorry its off topic but i know theres a few bike gurus on here.
Ive just brought a second hand giant xtc mountain bike and love it but the brakes dont stop it it has disc brakes with what looks like il stamped on i have adjusted the cables so there firm the pads are like new they clamp down but you just keep goin i cant work it out
Any ideas

[Edited on 17/3/11 by adam1985]

View User's Profile View All Posts By User U2U Member
wylliezx9r

posted on 17/3/11 at 10:31 PM Reply With Quote
Give the discs a good wipe down with isoprpyl alcohol or similar there may be some lubricant or something on the rotors. But i hate to say it ive had a lot of mountain bikes over the years and cable disc brakes are a gimic no better than v brakes, replace them with hydraulics if you want the best stopping power, depends what you're using the bike for i guess.





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
Liam

posted on 17/3/11 at 10:32 PM Reply With Quote
To be honest, in my experience, cable disc brakes are carp. Try Ebaying some nice hydraulic ones - you wont look back! Pads might look OK, but might be contaminated/glazed/carp. If you have no luck with adjustment and a good clean of the discs and check of the caliper mechanism, maybe consider new pads. But as above, I personally wouldn't have high expectations of cable disc brakes.

EDIT: beaten to it!

[Edited on 17/3/11 by Liam]

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
BenB

posted on 17/3/11 at 10:33 PM Reply With Quote
I'd take some sandpaper to the discs and pads. Works for cars
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Mr Whippy

posted on 17/3/11 at 10:34 PM Reply With Quote
I have cable disks on my mountain bike and they are plently strong enough, recon you have WD40 or the like on the pads






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
adam1985

posted on 17/3/11 at 10:39 PM Reply With Quote
I have cable discs on my old bike which are ok these just dont stop me at all ill try the sandpaper in the morning Good idea
Cheers for the help

View User's Profile View All Posts By User U2U Member
tegwin

posted on 17/3/11 at 10:45 PM Reply With Quote
Getting cable disks setup right has always been a pain in the arris..... its just not worth the hastle when a second hand hydro Shimano M525 can be had for about £30 with disk and lever etc.. Or £50-70 for a hope mini..





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
djtom

posted on 18/3/11 at 12:00 AM Reply With Quote
If you really want to persevere with the cable disks, then you're on the right lines with sandpaper and brake cleaner (IPA), but don't expect too much, they are very hard to set up well and to get a balance of power and acceptable feel.

Seeing as I just bought a complete pair of hope mini hydro brakes from ebay for £56 delivered though, is it worth it? I've seen Hayes and shimano sets selling for even cheaper!






View User's Profile View All Posts By User U2U Member
tomgregory2000

posted on 18/3/11 at 08:19 AM Reply With Quote
Dont buy hope brakes, total rubbish.
Had them and changed them for hayes stroker, most powerfull ive ever used but i have now changed them for some shimano slx, not as powerfull as the hayes but a nicer feel.

But as above, clean the disc, take the pads out and clean with acetone and then set fire to them to burn off the acetone and contaminents

View User's Profile View All Posts By User U2U Member
Liam

posted on 18/3/11 at 09:27 AM Reply With Quote
My Hope Minis were fantastic. Only time they were rubish was when I contaminated the pads. No amount of cleaning/sanding really sorted them. New pads and they were back to awesomeness.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Chaddy

posted on 18/3/11 at 09:40 AM Reply With Quote
My Hope minis on my Giant Anthem are fantastic and have been since I fitted them more than three years ago, just have to keep them clean. Cable discs will never be as good but you could try some Clarke sintered pads from Chainreaction cycles.
View User's Profile View All Posts By User U2U Member
coyoteboy

posted on 23/3/11 at 05:27 PM Reply With Quote
All the Hope brakes I've used are amazing. My DH4's are like anchors (though occasionally squeal), my mini's work a treat so long as you're not doing 25 minute alpine descents on 4 year old fluid, then they boil and vanish entirely (but the DH4 held up the rest of the way down on its own). My C2's are like anchors.

Cable discs, with a noteable couple of exceptions, are parp.

View User's Profile E-Mail User View All Posts By User U2U Member
RickRick

posted on 23/3/11 at 06:16 PM Reply With Quote
another vote for hope mini's and also for hope 4 pots. but there's nothing better than a good xtr v brake setup!!

for cross country that is not dh

[Edited on 23/3/11 by RickRick]

View User's Profile View All Posts By User U2U Member
lotusmadandy

posted on 23/3/11 at 08:13 PM Reply With Quote
I have a set of Tektro Auriga pro's on mine and they are fantastic.
They are a massive improvement over my sons shimano cable
set up.

Andy






View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.