garyo
|
| posted on 23/3/11 at 09:22 PM |
|
|
motor brushes
I'm struggling to find some motor brushes for an old Titan saw. I've found some pretty close ones that I could file down from 12.5mm x
5mm to 11mm x 5mm, but they don't have springs or caps.
Is it going to be as easy as I hope to apply some flux to the braid and solder them in to the caps on the old brushes?
Cheers
Gary
|
|
|
|
|
Ninehigh
|
| posted on 23/3/11 at 09:26 PM |
|
|
It might need to be conductive but I don't see why not... Worth a try anyway
|
|
|
MikeRJ
|
| posted on 23/3/11 at 09:49 PM |
|
|
I've modified brushes like this several times, shouldn't have a problem though you want to make sure not too much solder gets wicked up
the braid or it won't flex any more.
|
|
|
garyo
|
| posted on 23/3/11 at 10:43 PM |
|
|
Okay cheers. Brushed purchased!
|
|
|
