tegwin
|
| posted on 16/5/11 at 07:51 PM |
|
|
Anyone with a lathe and mill want some work?
I have some parts I need to get machined. So far my efforts to buy some machine tools have failed.
So, if anyone has a centre lathe and a small mill and want to earn some money, let me know. The parts are not too complex!
Can supply a DXF of the parts to anyone that might be interested 
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
big-vee-twin
|
| posted on 16/5/11 at 08:28 PM |
|
|
You should try Flak Monkey, send him a U2U
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
tegwin
|
| posted on 16/5/11 at 08:33 PM |
|
|
I dont think flak has a mill 
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
big-vee-twin
|
| posted on 16/5/11 at 08:46 PM |
|
|
Think he may have access where he works, worth a try
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
flak monkey
|
| posted on 16/5/11 at 08:53 PM |
|
|
No milling yet I am afraid, unless its only small bits. Or bits that can be set up in the lathe to do it.
Mill is on the cards for later in the year though
Sera
http://www.motosera.com
|
|
|
