Steve Hignett
|
| posted on 12/5/12 at 05:11 PM |
|
|
OT:- Can I bond Plyboard to metal (mild steel) angle with normal PU bond???
Hi All,
As above, I have a spare tube of PU (normal stuff in black for bonding FG wings to wingstays) and wondered whether I could sucessfully make a
relatively arduous task much easier! (I don't fancy drilling a hundred holes in 3mm steel angle iron!)
So, assuming I key both surfaces, what do people reckon the chances are that I will get a good bond? Other things to note are that this is not a
kitcar, and is a trailer. Therefore, not structural as anything weighing on the bonded join will only serve to press the mating faces together...
Thanks in advance for constructive feedback...
Cheers,
Steve
|
|
|
|
|
liam.mccaffrey
|
| posted on 12/5/12 at 05:21 PM |
|
|
yes, I wouldnt hesitate to do that
[Edited on 12/5/12 by liam.mccaffrey]
Build Blog
Build Photo Album
|
|
|
jacko
|
| posted on 12/5/12 at 05:24 PM |
|
|
Yes go for it its what we use at work in the bus industry
|
|
|
Steve Hignett
|
| posted on 12/5/12 at 07:07 PM |
|
|
Asante Gents..........
|
|
|
welderman
|
| posted on 12/5/12 at 08:46 PM |
|
|
It's a very robust trailer 
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
scootz
|
| posted on 12/5/12 at 08:48 PM |
|
|
This robust?
It's Evolution Baby!
|
|
|
welderman
|
| posted on 12/5/12 at 09:02 PM |
|
|
Not quite.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
nick205
|
| posted on 12/5/12 at 09:41 PM |
|
|
quote:
Originally posted by scootz
This robust?
You always go too far Scootz!
When we talk of a trailer we mean a bastardised caravan chassis which we hope might suffice to drag a kit car to the track and back without giving
out.....not the sort of trailer you would buy and then sell at less than purchase price 
|
|
|
