Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Ford fiesta Hub nuts
bigandy

posted on 3/5/05 at 01:28 PM Reply With Quote
Ford fiesta Hub nuts

Afternoon all.

I was wondering 2 things. Does anyone know what torque the hub nuts on a Ford fiesta should be tightened to? It's a Mk2 Fiesta XR2 by the way.

Secondly, should the hub nuts have large washers behind them?

Cheers
Andy





Dammit! Too many decisions....

View User's Profile E-Mail User View All Posts By User U2U Member
theconrodkid

posted on 3/5/05 at 04:23 PM Reply With Quote
mk 2 is tapered so just tighten till the play dissapears,there should be washers behind them





who cares who wins
pass the pork pies

View User's Profile E-Mail User View All Posts By User U2U Member
nick205

posted on 3/5/05 at 04:26 PM Reply With Quote
F'ing tight I'd say

For comparison, the Haynes manual figures fr a 205 GTi are 250Nm or 192lb/ft, which is higher than your average torque wrench goes.

HTH

Nick

******

Conrod - I stand corrected

[Edited on 3/5/05 by nick205]






View User's Profile View All Posts By User U2U Member
bigandy

posted on 3/5/05 at 06:13 PM Reply With Quote
I love that torque figure described by Effing tight!

Cheers though, I guess I need to go and see how much Mr FOrd wants for some replacement washers...

Cheers
Andy





Dammit! Too many decisions....

View User's Profile E-Mail User View All Posts By User U2U Member
rusty nuts

posted on 3/5/05 at 07:57 PM Reply With Quote
Do you mean front or rear hubs? as Conrod says for the rear but the fronts are done up pretty tight .
View User's Profile View All Posts By User U2U Member
nick205

posted on 3/5/05 at 08:35 PM Reply With Quote
Good point Rusty!

The figures I gave above are fro the front hub nuts on the end of the drive shafts.

Rear ones are as Conrod described.

HTH

Nick






View User's Profile View All Posts By User U2U Member
bigandy

posted on 3/5/05 at 09:48 PM Reply With Quote
Ah, perhaps I should have mentioned that they were the front hub nuts!

I think a trip to Halfrauds to inspect the appropriate book of lies, camera phone in hand is required! Ahem...

Cheers!
Andy





Dammit! Too many decisions....

View User's Profile E-Mail User View All Posts By User U2U Member
indykid

posted on 4/5/05 at 08:01 AM Reply With Quote
sod that. find a compliant looking one and ask them what torque they need doing up to? they'll say "ermmmm, lets look in the book of lies". you say "ah touche". then ask them to photocopy the relevant pages in the fax machine

not that i would ever do that or even condone doing that. and you'll have to take the shrinkwrap off.

its not what you know, it's who you know
tom






View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.