Tim 45
|
| posted on 21/8/05 at 02:42 PM |
|
|
Nissan micra
Anyone know how to enter a radio code into a Nissan micra (P)?
|
|
|
|
|
chrisg
|
| posted on 21/8/05 at 04:17 PM |
|
|
Sledge hammer and a cold chisel?
Cheers
Chris.
That's a no BTW
|
|
|
Peteff
|
| posted on 21/8/05 at 04:35 PM |
|
|
My Nissan van uses thestation preset buttons. When it asks for a code push the appropriate numbers.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Tim 45
|
| posted on 21/8/05 at 04:44 PM |
|
|
it says secure...is that when i should enter the code?
|
|
|
theconrodkid
|
| posted on 21/8/05 at 05:08 PM |
|
|
its usually first number on preset 1,2nd on preset 2 etc and enter on 5,you only get 10 goes and it locks out.
can get them re-coded at hi-fi shops for £20 ish
who cares who wins
pass the pork pies
|
|
|
Hellfire
|
| posted on 21/8/05 at 05:46 PM |
|
|
If you live near Sheffield - place in Attercliffe does them for £5.00
|
|
|
andybod
|
| posted on 21/8/05 at 08:42 PM |
|
|
try leaving radio an ign on for about 1/2 hour sometimes only lock out for a short while and then allow you to retry
|
|
|
woodster
|
| posted on 22/8/05 at 09:14 AM |
|
|
quote:
Originally posted by chrisg
Sledge hammer and a cold chisel?
Cheers
Chris.
That's a no BTW
very funny chris
|
|
|
britishtrident
|
| posted on 22/8/05 at 09:46 AM |
|
|
Usually pulling the fuse/disconnectiing the battery will unlock the "secure2 message and allow you to enter the code. The exact method of
entering the code varies from make to make but usuall station button 1 to 4 are pressed required number of times for each of the digits of the code
and 5 acts an accept key.
|
|
|
